Industrial Food Drying Solutionsinfo@tondemachine.comWhatsApp +86-185 0387 4173

Batch-Type Hot Air Circulation Food Drying Machine

Batch type hot air circulation food drying machine with tray trolley and open chamber doors
Batch-Type Hot Air Circulation Food Drying Machine Overview

A batch-type hot air circulation food drying machine is an enclosed tray dryer in which a top-mounted axial fan forces hot air horizontally across every tray of a wheeled stainless steel trolley, then recirculates most of that air back through the heater. This closed convection loop lifts thermal efficiency to up to 50% (versus 3-7% for an open drying room) and holds tray-to-tray temperature difference to ±2°C, so a full batch of fruit, vegetables, herbs or meat dries evenly without rotating trays.

  • Modular range: 1-5 trolleys, 48-240 trays, roughly 25-480 kg of wet product per batch
  • PID temperature control from ambient to 120°C; electric, steam or gas heating
  • Full SUS304 stainless steel body, trolleys and trays – GMP/HACCP-ready wash-down design
48-240Trays per machine (1-5 trolleys)
±2°CTop-to-bottom tray temperature difference
Up to 50%Thermal efficiency of the closed loop
25-480 kgWet product capacity per batch
Ambient-120°CPID-controlled drying temperature
SUS304Full stainless steel contact parts

What Is a Batch-Type Hot Air Circulation Food Drying Machine?

The batch-type hot air circulation food drying machine – also called a hot air circulation tray dryer or CT-C type oven – solves the oldest problem in tray drying: uneven airflow. In a simple box oven the trays nearest the heater over-dry while the corners stay moist. This machine uses a high-volume axial fan to push heated air through side ducts and blow it horizontally across and between every tray layer, with adjustable air-distribution plates equalising the flow. Most of the air is then recirculated through the heater instead of being dumped outside, which is where the energy savings come from.

Operation is a true batch cycle: load trays onto the wheeled trolley outside the chamber, roll it in, close the double doors, set temperature and time on the PID controller and press start. The machine vents humid air automatically through an adjustable exhaust damper while drawing in a controlled amount of fresh air. Standard models span a single-trolley 48-tray unit for a small workshop up to a five-trolley 240-tray industrial oven, so the same design scales with your output.

Batch type hot air circulation food drying machine with tray trolley and open chamber doors
Batch-type hot air circulation tray dryer: insulated chamber, wheeled tray trolley and side-mounted control cabinet.
Multi-trolley hot air circulation food drying machine range from 1 to 5 trolleys
The modular range: single-, double- and multi-door chambers accept 1-5 wheeled trolleys.

Technical Specifications

Standard configurations are listed below. Trays are 460×640×45 mm food-grade stainless steel (wire-mesh or punched-hole for airflow, solid or Teflon-coated for purées and fruit leathers); chamber size, heating source and voltage are customised to your material and factory.

Model Trays / Trolleys Chamber Size (mm) Heating Power Heat Output
HAC-48 48 trays / 1 trolley 1800×1600×2150 24 kW 19,000 kcal/h
HAC-96 96 trays / 2 trolleys 3500×1600×2150 30 kW 24,000 kcal/h
HAC-144 144 trays / 3 trolleys 4500×1700×2250 36 kW 30,000 kcal/h
HAC-240 240 trays / 5 trolleys 5600×1800×2250 60 kW 48,000 kcal/h

Standard electric heating models. Steam-coil and gas-burner versions use the same chambers with different heat exchangers; larger multi-trolley chambers are built to order.

Structure of hot air circulation drying machine: axial fan motor, moisture barrier, backing pans, door switch and electric control cabinet
Machine structure: axial fan motor and moisture barrier on top, tray trolley inside, electric control cabinet on the side.

Get a Hot Air Circulation Dryer Quote

Tell us your material, wet weight per batch and target moisture. Our engineers will select the model, tray type and heating source, and return cycle time and energy consumption per batch – usually within one working day.

  • Model and tray count sized to your batch weight
  • Drying time and temperature recipe for your material
  • Electric, steam or gas heating matched to your utilities

Send Us Your Requirements

Name, email, phone and your detailed requirement – we reply within one working day.

    Prefer email? Write to info@tondemachine.com and we will get back to you directly.

    Best Products to Dry in a Hot Air Circulation Machine

    Because temperature and airflow are set per recipe, one machine covers a very wide range of agricultural products. Typical uses include:

    Hot air circulation food dryer with high drying quality, low energy consumption and automatic temperature and humidity control
    Automatic temperature and humidity control keeps quality consistent across fruit, vegetable, herb and spice batches.
    • Fruit snacks – apple rings, mango slices, banana coins, pineapple chunks, raisins and fruit leathers. Gentle 60°C cycles keep colour and chewiness; see our dedicated fruit drying oven line.
    • Dehydrated vegetables – garlic flakes, onion, carrot dice, cabbage, mushrooms, chilli and sweet potato. For non-stop high-volume output, pair this batch oven with the industrial continuous vegetable drying machine.
    • Herbs, spices and botanicals – basil, mint, ginger slices, turmeric and tea leaves dry at 45-50°C to retain volatile aroma compounds.
    • Meat and seafood – jerky, sausage, fish and shrimp use low-temperature, humidity-controlled cycles; dedicated versions are covered by our meat drying oven and hot air seafood drying oven.
    • Nuts and seeds – low-temperature roasting and drying of pumpkin seeds, sunflower seeds and walnuts.
    Mango drying process in tray dryer: loaded trolleys, trays of mango slices and finished dried mango
    Mango processing example: trays loaded onto trolleys, staged drying and finished dried mango.

    How Does the Hot Air Circulation Dryer Work?

    Fruit and vegetables carry 80-90% water. To remove it without cooking the product, the machine continuously exchanges dry heat for moist air in four stages:

    1. Heat generation – electric elements (or a steam coil / gas burner) warm the air inside the chamber to the set point.
    2. Forced circulation – a top-mounted, high-temperature axial fan forces the hot air down the side ducts and blows it horizontally across and between every tray layer; adjustable distribution plates equalise top-to-bottom flow.
    3. Moisture extraction – as the air picks up moisture it is pushed out through the adjustable top exhaust damper while a controlled amount of fresh dry air is drawn in – a closed box without this vent would just become a sauna.
    4. Continuous cycle – most of the heat is recirculated back through the heater, repeating the loop until the batch reaches target moisture.

    Because most hot air is recycled instead of exhausted, the closed-loop design reaches up to 50% thermal efficiency – roughly 7-15× better than the 3-7% of a traditional open drying room – and holds the temperature difference between the top and bottom trays within ±2°C.

    Interior of hot air circulation drying oven showing two trolleys with perforated trays and air ducts
    Inside the chamber: wheeled trolleys with wire-mesh trays positioned in the horizontal airflow path.

    Key Features and Advantages

    • 100% food-grade SUS304 stainless steel – cabinet interior and exterior, trays and trolleys are fully welded with polished corners: anti-corrosive, easy to wash down, and built to GMP/HACCP hygiene practice (SUS316L available for high-acid or salty products).
    • Heavy-duty wheeled trolleys – operators load trays onto the cart outside the chamber and roll it in, so batch changeover takes minutes. Extra trolleys let the next batch be prepped while the current one dries.
    • Precision PID control cabinet – intelligent temperature controllers, timers and fan switches hold any set point from a gentle 45°C for herbs to a robust 75°C for garlic flakes, and run the cycle autonomously.
    • Thick insulation and sealed doors – polyurethane/rock-wool insulated walls with high-temperature silicone door seals and safety door switches keep heat inside, cut electricity use and keep the outer skin safe to touch.
    • Customisable trays – wire-mesh or punched-hole trays let air pass through the product for even drying; solid or Teflon-coated trays handle purées, fruit leather and powders.
    • Zero product waste – airflow reaches top, middle and bottom trays equally, so there is no need to pause and rotate trays mid-cycle.
    Hot air circulation food drying machines in the factory: single door, double door and multi-trolley industrial models
    Factory line-up: single-door, double-door and large multi-trolley industrial chambers.

    Ask an Engineer About Your Product

    Not sure whether hot air circulation, heat pump or microwave drying suits your material and budget? Send us the product, wet kg per day and target moisture – we will compare the options honestly, with cycle time and energy numbers for each.

    • Honest comparison: hot air vs heat pump vs microwave
    • Reference drying curves from similar products
    • Workshop layout, trolley count and shipping plan

    Send Us Your Requirements

    Name, email, phone and your detailed requirement – we reply within one working day.

      Prefer email? Write to info@tondemachine.com and we will get back to you directly.

      Hot Air Tray Dryer vs. Heat Pump Dryer vs. Freeze Dryer

      All three are batch machines, but they differ sharply in cost, speed and product character. If your priority is the lowest possible energy bill at low temperature, see the batch-type heat pump food drying machine; for premium appearance, the hot air circulation dryer remains the global workhorse.

      Feature Hot Air Circulation Tray Dryer Heat Pump Dryer Freeze Dryer
      Purchase cost Low Medium Very high
      Running cost Low – closed loop, up to 50% efficiency Lowest – moves heat, saves 60-75% Highest – vacuum refrigeration
      Drying speed Fast (6-12 h typical batches) Slower, gentle low temperature Very slow (20 h+)
      Product texture Chewy, classic dried fruit/vegetable Soft, low-temperature quality Crispy, near-original shape
      Temperature range Ambient-120°C 20-80°C Below 0°C (sublimation)
      Maintenance Minimal – fan, seals, controls Refrigeration system service Complex vacuum plant
      Best suited for Fruit, vegetable, herb and meat batches at scale Heat-sensitive premium goods, low energy bills High-value instant and nutraceutical products

      Rule of thumb: hot air circulation for the best cost-to-throughput balance; heat pump when energy is the top priority; freeze drying only where the retail price justifies it.

      Why Global Buyers Choose This Machine

      Hot air circulation fruit drying machine with food grade stainless steel chamber and control panel
      Fruit drying configuration: stainless chamber with visible control cabinet, suitable for mango, banana and berry batches.
      • Uniform quality, batch after batch – engineered horizontal airflow reaches every tray equally, eliminating burnt edges, case-hardening and colour degradation on premium products.
      • Built to run for decades – no delicate continuous belts or refrigeration circuits; with basic cleaning and fan maintenance the all-stainless oven runs season after season as the workshop workhorse.
      • Scales with your business – start with a single-trolley 48-tray unit for an artisanal line and grow into multi-door, multi-trolley industrial chambers without changing technology, trays or spare parts.
      Hot air circulation vegetable drying machine with trolley and control cabinet
      Vegetable configuration: wide chamber with side control cabinet and dedicated tray trolley.

      Related Drying Equipment

      Every machine below is part of the same heat-pump, hot-air and dielectric drying range, so trays, trolleys, control logic and spare parts are shared across the line. If the model on this page is not the closest fit, one of these usually is:

      Frequently Asked Questions

      How long does it take to dry fruits or vegetables in a hot air circulation dryer?

      Drying time depends on the initial moisture content, slice thickness and target final moisture. As general guidelines at 5 mm slice thickness: sliced fruits such as apple, mango and banana take 6-10 hours at 60°C; leafy greens and herbs take 3-5 hours at 45-50°C; root vegetables such as carrot and sweet potato take 7-12 hours at 65°C. Send us your product details and we will return a precise time-and-temperature recipe.

      Can I set different temperatures for different products?

      Yes. The PID temperature controller lets you dial in any set point from ambient up to 120°C (higher on request), so delicate herbs and robust root vegetables can each run at their own recipe on the same machine.

      How do I choose the right size drying machine for my facility?

      Size by wet input per batch: a 1-door, 1-trolley unit handles roughly 50-100 kg; 2-4 trolleys cover about 200-500 kg; industrial multi-trolley chambers handle 1,000+ kg. Because trolleys are on wheels, many customers buy an extra trolley so the next batch is prepped while the current one dries.

      What types of drying trays are available?

      For most fruits and vegetables we recommend SUS304 wire-mesh or punched-hole trays, which let hot air reach the product from above and below. For purées, fruit leather and fine powders we supply solid stainless or non-stick Teflon-coated trays. Trays are 460×640×45 mm and interchangeable across the range.

      Does the machine meet food safety standards such as GMP, HACCP or FDA?

      The entire cabinet, trolleys and trays are food-grade SUS304 stainless steel (SUS316L available for acidic or salty products), with polished welds and no dead corners, so the chamber washes down quickly and supports GMP/HACCP hygiene programmes.

      How does moisture escape the drying chamber?

      An adjustable exhaust damper on top of the machine continuously expels humid air while drawing in a controlled amount of fresh dry air. Without this vent a closed box would simply turn into a sauna – the exchange of hot dry air for humid air is what keeps drying, not cooking.

      How does this hot air dryer compare with a heat pump dryer or freeze dryer?

      Hot air circulation dryers are significantly cheaper to buy and operate, and are the global standard for chewy dried fruits and dehydrated vegetables. Heat pump dryers dry more slowly at lower temperature but cut electricity use by 60-75%. Freeze dryers preserve shape best but cost far more per kilogram. The comparison table above summarises the trade-offs.

      Can I dry different products at the same time?

      Physically yes, but we do not recommend it: strong odours migrate with the circulating air (garlic and apple in one batch is a classic mistake), and different products need different times and temperatures. Dry in dedicated batches for best quality.

      Is installation and operation difficult?

      No. Standard electric models are essentially plug-and-play: connect the machine to your factory power supply, roll in the loaded trolley, close the sealed doors, set temperature and timer, and press start. The machine maintains the set point and vents humidity automatically. Export models ship fully assembled in fumigation-free wooden cases with English manuals and wiring diagrams.

      What maintenance does the machine need?

      Because it is a batch dryer with no delicate belts or refrigeration circuit, maintenance is minimal: wipe down the stainless interior, wash the trays, and periodically check the door seals and fan motor lubrication. With this basic care the machine is designed for decades of reliable service.

      Get a Free Drying Proposal

      Tell us the material, wet kg per batch, initial and target moisture, and your local voltage. Our engineers will select the model and tray type and return cycle time, energy consumption and an investment estimate – usually within one working day.

      • Free model selection and process evaluation
      • Drying recipe: temperature, time and energy per batch
      • Export packing, spare trays and installation support included

      Send Us Your Requirements

      Name, email, phone and your detailed requirement – we reply within one working day.

        Prefer email? Write to info@tondemachine.com and we will get back to you directly.